Want to use your patio or balcony even on cooler days? No problem, with WALTER's infrared heaters, the cold stays outside. Whether
Whether as a freestanding unit, ceiling-mounted radiant heater or wall-mounted radiant heater – simply heat where you need the warmth.

Why are infrared heaters particularly suitable for patios?

As summer draws to a close and the days grow shorter, sitting on the patio is no longer a given. Those who want to continue enjoying the outdoors need an additional heat source. Infrared heaters are the ideal choice because pleasant warmth is available instantly at the touch of a button. The temperature can be easily and quickly adjusted as needed to banish the chill.

What does heating with infrared heat feel like?

Infrared heat is characterized by the fact that it generates even heat throughout the entire target area. It creates a pleasant and comfortable climate.

How is the heat generated?

Similar to sunlight, infrared heaters warm a specific area purely through thermal radiation. They don't heat the air, but rather surfaces such as floors, walls, and people. These surfaces store the heat and then release it. Infrared heaters heat up very quickly, so the radiant heat is generated very rapidly.

Advantages at a glance

• Fast heat: Infrared heaters generate instant heat without long warm-up times.
• Various models: wall-mounted, freestanding, or ceiling-mounted infrared heaters? Infrared heaters are available in a wide variety of designs. This ensures there's an ideal device for every room size.
• Easy control: The radiant heaters can be easily controlled both with a remote control and directly on the device.
• Easy installation: The installation of infrared heaters is usually straightforward, especially thanks to the practical brackets and installation instructions that are included.
• No fire hazard: Unlike traditional heating systems that use open flames or hot surfaces, infrared heaters pose no fire hazard. They heat objects and people precisely without generating high temperatures on the heating elements themselves.
• Low energy consumption through direct radiation: Infrared heaters operate with direct radiation for efficient energy consumption. This means the heat is generated precisely where it's needed. This saves you energy and therefore money.
• No fossil fuels: Infrared heaters are powered by electricity and require neither oil nor gas. Unlike gas heaters, they can be used both indoors and outdoors without any problems.
• Silent

How do I choose the right spotlight?

The size of the room and the type of installation are crucial:

Room size

How is the room used and how large is the area to be heated? If it's a larger room, several radiant heaters may be necessary. A general rule of thumb recommends approximately 60 to 100 watts per square meter.

Mounting option

Where is the heat needed? Decide whether you want to place the heater on the wall, on the ceiling, or freestanding, depending on the room layout and your preferences. Check if the heater offers different heat settings so you can flexibly regulate the heat as needed and save energy at the same time.

Safety features

Since infrared heaters have no open flame or hot surfaces, there is no fire hazard. If the heater is to be used outdoors (e.g., on patios), an IP55 certification is required. This indicates that the device is protected against small dust particles and splashing water.

What is the electricity consumption?

The energy consumption of an infrared heater depends on various factors, including:

• Model variant: What properties (e.g., energy efficiency) does the spotlight have?
• Wattage: How much power does the device have?
• Operating time: The longer the radiator is in operation, the more electricity is consumed.

For example, if your infrared heaters have a power output of 2000 watts (2 kW), they will consume 2000 watts or 2 kilowatt hours (kWh) of electricity per hour.

formula

To calculate the actual electricity consumption in kWh, multiply the wattage of the heater (in kW) by the operating time (in hours): Power (kW) x Operating time (h) = Electricity consumption (kWh)

Example

If you use a 2,000-watt infrared heater for two hours, the electricity consumption is 4 kWh:

2 kW (power) x 2 h (operating time) = 4 kWh (electricity consumption)

What should be considered during assembly?

Thanks to practical brackets and a well-designed construction, installation is straightforward in most cases. When choosing the mounting location, the most important factors are which area needs to be heated and how much space is available.

 Ceiling mounting

• No floor space is required.
• The room is heated evenly.
• If the ceiling is made of glass, it must be heat-resistant. Otherwise, this type of installation is not recommended.
• Not every radiant heater is suitable for ceiling mounting: If in doubt, consult the instruction manual.

Stand assembly

• Can be used selectively: Depending on the need, heating can be provided exactly where the heat source is required (e.g., reading corner).
• Easy installation (less complicated than ceiling mounting).
• If a patio heater is not needed (e.g. in summer), it can be easily stored away.
• Suitable for glass roofs where ceiling mounting is not possible.

Conclusion: An ideal heating option for patios, gazebos & pergolas

Because heat is generated quickly and easily regulated, infrared heaters are particularly well-suited for heating patios, gazebos, and pergolas. When selecting the right device, it is crucial to consider the area to be heated, where the heater will be mounted, and whether it will also be used outdoors.

Why order from the WALTER online shop?

• 36-month warranty
• Secure payment options
• Free returns
• 14-day return policy
• Trusted Shops certified
• International WALTER service centers