Angle grinder 1200 W / 125 mm

This tool combines power and ease of use. The WALTER Flex angle grinder impresses both DIY enthusiasts and professionals with its compact size and slim metal housing. Thanks to its 1200 W motor, it achieves an electronically adjustable no-load speed of up to 12,000 revolutions per minute. This makes the WALTER 125 mm angle grinder the ideal and, above all, versatile addition to your home workshop.

Angle grinders come in various sizes. The 125 mm size offers the following advantages:

• Handy and compact design
• Precise handling
• Versatile application
• High maneuverability
• Lightweight
• Cost-effective acquisition

If you need a greater cutting depth and primarily work on construction sites, it might be worth considering a 230 mm angle grinder. The choice between a 125 mm and a 230 mm angle grinder depends on your specific requirements and preferences.

The speed of the angle grinder is electronically adjustable and can be set very easily using the dial.

• Do you want to rough grind metal, steel, and stainless steel? Use resin-bonded and durable cutting discs. Set the dial to level 6 and work at an angle of 30–40 degrees.
• Do you want to cut stone or concrete? Diamond cutting discs are the right tool for you.
  Method of choice. Set the dial to level 4 and work in reverse.
• Do you want to cut metal? Here too, you should use...
  Use diamond cutting discs and work at level 4.

Note: The speeds given here are approximate. The required speed depends on the material being machined and can be determined through practical testing.

The discs can be easily replaced yourself. When the locking button is pressed, you can loosen the retaining nut with the included wrench, replace the disc, and then replace and tighten the flange nut.

The included cutting disc guard is suitable for abrasive cutting. Thanks to its tool-free adjustment with a clamping lever, it can be mounted in no time. This means you don't have to interrupt your work process for long, even when changing a cutting disc. For rough grinding, you will need an additional protective hood.

In addition, the Flex is also equipped with a switch-on lock.