FERREX 18V li-ion hammer drill and impact driver kit
Item No.: 44019086

18V li-ion hammer drill and impact driver kit

The FERREX hammer drill and impact driver are ideal for drilling, tightening and loosening screw connections.

 

 

This item can not be ordered.
The FERREX hammer drill and impact driver are ideal for drilling, tightening and loosening screw connections. The drill is suitable for drilling in wood, metal, masonry and driving wood screws and impact drilling. The battery is equipped with a charge level indicator, which displays an indication of the battery charge level. You can use the battery charge status indicator to plan your work in advance. For your convenience the belt clip makes it possible to grab your tool at every time and everywhere. The clip can be fitted to either side of the machine. For accurate work you can adjust the speed by varying the pressure exerted on the trigger. Also, the drill and the driver are equipped with an LED worklight that facilitates working in inaccessible, dark places.
The hammer drill and the impact driver are practically maintenance-free.

The impact driver and hammer drill must only be used together with the 18 V li-ion battery (629120) and the 22 V charger (629121).
  • Ideal for drilling, tightening and loosening screw connections
  • Variable speed control
  • High-torque driver with up to 180 Nm
CORDLESS HAMMER DRILL
Chuck capacity:
2 - 13 mm
No load speed Speed range 1:
0 - 350 rpm
Impact rate Speed range 1:
0 - 5250 bpm
Torque settings:
16 plus drill setting plus hammer drill
Torque max.:
35 Nm
Max drilling capacity:
Steel 13 mm / Wood 25 mm / Masonry 8 mm
Protection category:
III
Sound pressure level LpA:
84 dB(A)
Sound power level LwA:
95 dB(A)
  • 1 x Hammer drill
  • 1 x Impact driver
  • 2 x 18 V Battery
  • 1 x Battery charger
  • 1 x Instruction manual
  • 1 x Warranty card
You might need:

Matching accessories