








The WALTER bench drill with 500 W works powerfully through materials, such as wood, plastic and even metal, covering almost all areas for private use.
The speed can be optimally adjusted with the aid of the nine-step speed control, so that even very hard materials can be drilled effortlessly and precisely.
The swiveling drill table provides maximum flexibility and the adjustable tilt angle also allows for inclined holes. The drilling depth can be adjusted individually. The table drill is complete with the included machine vice.
The speed can be optimally adjusted with the aid of the nine-step speed control, so that even very hard materials can be drilled effortlessly and precisely.
The swiveling drill table provides maximum flexibility and the adjustable tilt angle also allows for inclined holes. The drilling depth can be adjusted individually. The table drill is complete with the included machine vice.
- swiveling drilling table for inclined holes
- inclination angle of the drill table adjustable with a scale
- drilling depth adjustable with drilling depth stop
- including machine vice
Volume:
0.05 m³
length:
20 cm
width:
48 cm
height:
64 cm
rated voltage:
230 V ~/50 Hz
recording power:
500 W
speed:
9 steps
spindle speed:
500 - 2500 rpm
spindle stroke:
50 mm
drill chuck:
1.5 - 16 mm with safety guard
table size:
170x165 mm, fully adjustable
protection class:
I
v-belts; K-478 (478x6.6 mm)
diameter column:
45.87 mm
base plate:
L 20 cm/W 31,5 cm/H 4 cm
outreach:
115 mm
drill chuck with vice:
base plate - drill chuck 25 cm/drill table - drill chuck 16,5 cm
drill chuck without vice:
base plate - drill chuck 27.5 cm/drill table - drill chuck 19 cm
spindle stroke:
5 cm
- 1x WALTER bench drill
- 1x machine vice
- 1x user manual
You might need:
Matching accessories

You might also like: