With the WALTER 2in1 water pump, both dirty water and clear water can be pumped. So, the pump is suitable for example for pumping off floods, as well as for pools, ponds and rain barrels.
The lowest flow rate is only 50 mm and therefore all containers are pumped out cleanly and thoroughly. The maximum head is 9 m and the power cable measures 10 m. This means that only in the rarest of cases will an extension be necessary for operation. The practical universal hose connection can be easily adapted to different hose sizes.
The changeover between dirty and clear water is done by briefly pulling and turning the exchange filter on the bottom of the pump.
- can be used for both dirty and clear water
- delivery head up to 9 m
- pressure hose connection can accommodate different diameters
mains connection:
220-240 V~/ 50Hz
capacity:
16.500 liters/hour / 16,5 m³/h
maximum immersion depth:
7 m
minimum conveying height (automatic):
150 mm
minimum delivery height (manual):
50 mm (dirty water) 5 mm (clear water)
diameter pressure hose connection:
1" = 25 mm | G1 = 33 mm | 1 1/2" = 38 mm | G1 1/2 = 47.8 mm
- 1x 2in1 water pump
- 1x universal hose connection
- 1x user manual